Specifications of JUCA Products

Other JUCA Models

B-3B

The workhorse of the JUCA line, the B-3B has been completely heating many thousands of homes for over twenty years. The versatility of being able to install it upstairs, downstairs, in an attached garage or cellar; of using it as a room heater, as an add-on furnace, or as a separate furnace; of being able to enjoy the fire thru a large glass door; make it the best woodburner on the market.

With its capability of heating very large houses and since the B-3B has a huge firebox that will take large pieces of wood, you get long, even heating just like a regular furnace.

The unit has adjustable warm air outlets on both sides which send warm air downward and out to evenly distribute heat throughout a large open area, even when the ducting capability is not used.

8" Flue; Black is standard. The top half can be any of 35 other colors; Blower rating 465 cfm(std) to 2550 cfm.

B-3J

Slightly smaller version of the B-3B. Good for medium sized houses. Quite popular when space is at a premium.

The unit has adjustable warm air outlets on both sides which send warm air downward and out to evenly distribute heat throughout a large open area, even when the ducting capability is not used.

6" Flue; 465 cfm(std) or 1240 cfm blower; Black is Standard. The top half can be any of 35 other colors.

K-3

A smaller yet version of the B-3B. Good for small houses or cabins. This model does NOT have ducting capabilities.

The unit has warm air outlets on both sides which send warm air downward and out to evenly distribute heat throughout a large open area.

6" Flue; 465 cfm blower. Black is standard. The top half can be any of 35 other colors.

B-3A

Identical to the B-3B but without the glass door. A heavy steel door is used for basement-type applications where it is not desired to see the fire. The unit has adjustable warm air outlets on both sides which send warm air downward and out to evenly distribute heat throughout a large open area, in addition to the ducting capability.

B-3D

A variation on the B-3B design that has glass on three sides for enjoying the fire from everywhere. The B-3D is a focal point of any room. The unit can appear to sit on a stone or brick raised hearth. Lower part is firebrick lined. All one piece construction.

Combines the massiveness of masonry with the modern appearance and performance of a JUCA. You can have an ash dump; an outside air intake; a gas line for a log lighter; etc.

The unit has adjustable warm air outlets on both sides which send warm air downward and out to evenly distribute heat throughout a large open area, even when the ducting capability is not used.

10" Flue; Black is standard. The top half can be any of 35 other colors; Blower rating 465 cfm(std) to 2550 cfm.

B-3C

Identical to B-3D except has an open (no) bottom and MUST be installed only over masonry (NO wood under unit), on a firebrick-and-masonry firepit (not included) to combine the massiveness of masonry with modern appearance/efficiency. Use model B-3D over a wood floor.

The unit has adjustable warm air outlets on both sides which send warm air downward and out to evenly distribute heat throughout a large open area, even when the ducting capability is not used.

10" Flue; Black is standard. The top half can be any of 35 other colors; Blower rating 465 cfm(std) to 2550 cfm.

B-3D7

This shorter version of a B-3D is for applications where the full capabilities of the B-3D are not needed and/or where the size of the B-3D might aesthetically dominate the room. This model has fewer heat exchangers which allows less heating capability than most other JUCAs.

The unit has adjustable warm air outlets on both sides which send warm air downward and out to evenly distribute heat throughout a large open area, even when the ducting capability is not used.

10" Flue; Black is standard. The top half can be any of 35 other colors; Blower rating 465 cfm(std) to 1450 cfm.

B-3N

Similar to the B-3B but with 3 glass sides. Side glass walls are vertical, instead of the sloping lower walls on the B-3B.

The unit has adjustable warm air outlets on both sides which send warm air downward and out to evenly distribute heat throughout a large open area, even when the ducting capability is not used.

8" Flue; Black is standard. The top half can be any of 35 other colors; Blower rating 465 cfm(std) to 2080 cfm.

B-3JN

Similar to the B-3J but with 3 glass sides. Side glass walls are vertical, instead of the sloping lower walls on the B-3J.

The unit has adjustable warm air outlets on both sides which send warm air downward and out to evenly distribute heat throughout a large open area, even when the ducting capability is not used.

6" Flue; Black is standard. The top half can be any of 35 other colors; Blower rating 465 cfm(std) to 1240 cfm.

F-9A

The built-in version of the JUCA high-efficiency wood burning furnace combines the performance of a good furnace with the attractiveness of a traditional-looking fireplace. This unit allows enjoyment of a cozy fire and the heating of the whole house at the same time. The efficiency and performance of our built-in fireplace is much higher than anything else on the market. The F-9 was approved to UL standards and received BOCA listing.

There is flexibility of installing an ash dump; an outside air intake; a gas line for a log lighter or gas logs. Size is very flexible, too: we have made F-9A units as large as 78" wide!

The F-9A facing is a popular brass door assembly. We offer over 2,000 facing styles and finishes, including Arch-Top and other unique designs. No black metal panels or register grilles are present to distract from the appearance of the fireplace. The F-9A standard price includes very nice quality brass doors.

108" Flue; Blower rating 465 cfm(std) to 2550 cfm.

F-9AR

This Option on the JUCA Model F-9A has a steel rear door to allow feeding the fire from a garage or utility room behind the JUCA.

Specifications like F-9A except 40 lbs heavier; output 15,000 less.

F-9AX

All F-9AX models have glass doors on two opposite sides for see- thru applications. The fire may be fed and enjoyed from both rooms. As with all JUCA units, custom dimensions and features are allowable. We have even made units which are Arch-Top on one side and Rectangular on the opposite side. We doubt that such a unit would be available from any other source.

On a JUCA F-9AX, you can choose among the 2,000 appearances available for each side individually!

10" Flue; Blower rating 465 cfm(std) to 2550 cfm.

L-8

CUSTOM BUILT to improve an existing fireplace's efficiency

We use six dimensions of your fireplace opening to design and build a unique product especially for you!

Our fireplace insert has a very large glass door combined with an automatic 465 cfm forced air system and heat exchangers. Can heat most of your house. Custom built to your fireplace's measurements. Extends out about 10" from the brickwork. All specifications are unique since each unit is designed FOR THAT FIREPLACE!

L-10

CUSTOM BUILT to improve an existing fireplace's efficiency

We use six dimensions of your fireplace opening to design and build a unique product especially for you!

Performs similarly to the L-8 but has a different facing which is primarily a brass bi-fold door assembly 8" out from the wall with black intake and warm air grilles on the sides. The automatic blower is 330 cfm. Extends about 6" out from the fireplace brickwork.

In case you got to this page from a search:
The JUCA Web-Site is at: http://mb-soft.com/juca/index.html